Print
MATERIAL SAFETY DATA SHEETS
LIPASE SUBSTRATE
C340-0A; C340-01; C342-01
H340-0A
V340-0B
 
Manufacturers Identification
 
CATACHEM, INC.
353 Christian Street, Suite 2
Oxford, CT 06478
Phone: (203) 262-0330 
Fax: (203) 262-9836
Email: catachem@catacheminc.com
 
Material Identification And Information
Components: Organic buffer system, TOOS, Microbial enzymes and Additives.
 
Physical /Chemical Characteristics
pH: N/A
Boiling Point: N/A
Specific Gravity: 1.0
Appearance and Odor: Lyophilized powder. 
Solubility: Soluble in water.
 
Fire  And Explosion Hazard Data
Extinguishing Media: Water spray, C02, foam.
Special Fire Fighting Procedures: Wear protective clothing, goggles, and mask to prevent contact.
Unusual Fire and Explosion Hazards: Not considered to be an explosion hazard. 
 
Reactivity Hazard Data
Stability:  Stable 
Incompatibility (Materials to Avoid): Oxidizers and Heavy metals
Hazardous Decomposition Products: None.
Hazardous polymerization: Will not occur
 
Health Hazard Data
Effects of Overexposure: May cause irritation if inhaled, ingested or absorbed into skin. 
First Aid Procedures: In case of contact with skin or eyes, remove contaminated clothing and shoes. Wash affected area with copious amounts of water.  Assure adequate flushing of eyes by separating eyelids with fingers.  Call a physician.  If inhaled, remove to fresh air. If ingested do not induce vomiting.  Drink large quantity of water or milk and call a physician.
Emergency First Aid Procedures: Seek medical assistance for further treatment, observation and support if necessary. 
 
Control And Protective Measures
Eye Protection: protective glasses
Protective Gloves: rubber or latex
Ventilation to be used: local exhaust
Other Protective Clothing and Equipment: lab coat, mask
 
Precautions For Safe Handling And Use/Spill/Leak Procedures
If Material is Spilled or Released: Waste should be absorbed and placed in suitable container for disposal.
Waste Disposal Methods: Do not flush to sewer.  Dispose of according to local, state and federal regulation.
Precautions for Handling and Storage: Store at 2-8 °C.
 
 
MATERIAL SAFETY DATA SHEETS
LIPASE DILUENT
C340-02; C342-02; C340-0A
 
 
Manufacturers Identification
 
CATACHEM, INC.
353 Christian Street, Suite 2
Oxford, CT 06478
Phone: (203) 262-0330 
Fax: (203) 262-9836
Email: catachem@catacheminc.com
 
Material Identification And Information
Components: Organic buffer system, Bile acids salt and Bacteriozide.
 
Physical /Chemical Characteristics
pH: N/A
Boiling Point: N/A
Specific Gravity: 1.0
Appearance and Odor: Clear colorless liquid. 
Solubility: Soluble in water.
 
Fire  And Explosion Hazard Data
Extinguishing Media: Water spray, C02, foam.
Special Fire Fighting Procedures: Wear protective clothing, goggles, and mask to prevent contact.
Unusual Fire and Explosion Hazards: Not considered to be an explosion hazard. 
 
Reactivity Hazard Data
Stability:  Stable 
Incompatibility (Materials to Avoid): Avoid reducing agents.
Hazardous Decomposition Products: CO2, CO, and NO2
Hazardous polymerization: Will not occur
Finished product: Contains sodium azide as preservative. Sodium azide may react with cooper or lead plumbing to form explosive azides. Upon disposal flush with large amounts of water.
 
Health Hazard Data
Effects of Overexposure: May cause irritation if inhaled, ingested or absorbed into skin. 
First Aid Procedures: In case of contact with skin or eyes, remove contaminated clothing and shoes. Wash affected area with copious amounts of water.  Assure adequate flushing of eyes by separating eyelids with fingers.  Call a physician.  If inhaled, remove to fresh air. If ingested do not induce vomiting.  Drink large quantity of water or milk and call a physician.
Emergency First Aid Procedures: Seek medical assistance for further treatment, observation and support if necessary. 
 
Control And Protective Measures
Eye Protection: protective glasses
Protective Gloves: rubber or latex
Ventilation to be used: local exhaust
Other Protective Clothing and Equipment: lab coat, mask
 
Precautions For Safe Handling And Use/Spill/Leak Procedures
If Material is Spilled or Released: Waste should be absorbed and placed in suitable container for disposal.
Waste Disposal Methods: Do not flush to sewer.  Dispose of according to local, state and federal regulation.
Precautions for Handling and Storage: Store at 2-8 °C.
 
 
MATERIAL SAFETY DATA SHEET
LIPASE ACTIVATOR 
C340-03; C342-01; C340-0A
H340-0A
V340-0B
Manufacturers Identification
 
CATACHEM, INC.
353 Christian Street, Suite 2
Oxford, CT 06478
Phone: (203) 262-0330 
Fax: (203) 262-9836
Email: catachem@catacheminc.com 
 
Material Identification And Information
Components:   Organic buffer system, Bile acids salt,  Aminoantipyrine.
 
Physical /Chemical Characteristics
pH: N/A
Boiling Point: N/A
Specific Gravity: 1.0
Appearance and Odor: Clear colorless liquid.
Solubility: Soluble in water.
 
Fire  And Explosion Hazard Data
Extinguishing Media: Water spray, C02, foam.
Special Fire Fighting Procedures: Wear protective clothing, goggles, and mask to prevent contact.
Unusual Fire and Explosion Hazards: Not considered to be an explosion hazard. 
 
Reactivity Hazard Data
Stability:  Stable 
Incompatibility (Materials to Avoid): N/A.
Hazardous Decomposition Products:  C0, C02, N02.
Hazardous polymerization: Will not occur,
Finished product: Contains sodium azide as preservative. Sodium azide may react with cooper or lead plumbing to form explosive azides. Upon disposal flush with large amounts of water.
 
 
Health Hazard Data
Effects of Overexposure: May cause irritation if inhaled, ingested or absorbed into skin. 
First Aid Procedures: In case of contact with skin or eyes, remove contaminated clothing and shoes. Wash affected area with copious amounts of water.  Assure adequate flushing of eyes by separating eyelids with fingers.  Call a physician.  If inhaled, remove to fresh air. If ingested do not induce vomiting.  Drink large quantity of water or milk and call a physician.
Emergency First Aid Procedures: Seek medical assistance for further treatment, observation and support if necessary. 
 
Control And Protective Measures
Eye Protection: protective glasses
Protective Gloves: rubber or latex
Ventilation to be used: local exhaust
Other Protective Clothing and Equipment: lab coat, mask
 
Precautions For Safe Handling And Use/Spill/Leak Procedures
If Material is Spilled or Released: Waste should be absorbed and placed in suitable container for disposal.
Waste Disposal Methods: Do not flush to sewer.  Dispose of according to local, state and federal regulation.
Precautions for Handling and Storage: Store at 2-8 °C.
 
The above information is believed to be correct, but does not purport to be all inclusive and should be used only as a guide. Catachem Inc. shall not be held liable for any damage resulting from handling or from contact with the above product.  For technical assistance please call: 203-262-0330